EX-6031
Ethernet Data Gateway to 1x RS-232, metall
The EX-6031 in metal box allows you to connect up to four serial devices via the Ethernet network in the simplest way. So you are no longer limited to a fixed distance, but can control any RS-232 peripheral device over the network. You can easily connect EX-6031 to the network with IP address (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP ping). It is also possible to control the devices via the enclosed and other Virtual COM software. The COM ports are then entered in the device manager. The EX-6031 can be screwed directly to the wall or installed in a 19" rack with the optionally available DIN-Rail Kit (EX-6099). Power is supplied via the included plug-in power supply.
Interface: RS-232 V.24
Data Bits: 7, 8
Parity: none, even, odd
RS-232 Signal: TxD, RxD, GND (Loop RTS, CTS, DTR, DSR, DCD)
Ethernet Protocol: IP, TCP, DHCP
Packaging contents:EX-6031, Power Supply +12V/1A, Driver CD, Manual
EX-6111-2POE
Ethernet PoE to 1 x RS-232 port, incl. 5V/4A power supply
The EX-6111-2PoE is a multi-protocol RS-232 serial Device Server designed to connect a RS-232 serial device, including point-of-sale systems, barcode readers, sensors, meters, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial device is connected via Ethernet and available for sharing on the subnet and Internet. Remote configuration is done via extensive network protocols such as TCP server, TCP client, UDP, VCOM or serial Telnet/RFC2217. To ensure backward compatibility with legacy serial devices running existing COM port application software, the EX-6111-2PoE provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. The EX-6111-2PoE supports Power over Ethernet and can be powered directly from a PoE-compliant power supply unit (PSE) via the Ethernet cable. In addition, serial devices can communicate with each other in peer-to-peer mode without the need for an intermediate PC or conversion software.
Interface: RS-232 V.24
15KV ESD Surge Protection for all serial signal
Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space
Fully IEEE 802.3af compliant PoE (PSE) type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W
RS-232 Signal:
TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
Ethernet Protocol:
TCP Server, TCP Client, UPD, VCOM, Serial Telnet/RFC2217
Direct connection with Socket Port
Point to point connection, don’t need any software
Virtual COM Software for download
Voltage +5V configurable on pin 9
Rugged Metal Case with Wallmount and DIN-Rail Kit
Delivery contents:EX-6111-2PoE, Power Supply 5V/4A, DIN-Rail Kit, Wallmount kit, Manual
EX-6112-2POE
Ethernet PoE to 2x RS-232 port, incl. 12V/3A power supply
The EX-6112-2PoE is a multi-protocol RS-232 serial device server designed to connect RS-232 serial devices, including point-of-sale systems, barcode readers, sensors, meters, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial devices are connected via Ethernet and are available for sharing on the subnet and Internet. Remote configuration is done via extensive network protocols such as TCP server, TCP client, UDP, VCOM, serial Telnet/RFC2217. To ensure backward compatibility with legacy serial devices running existing COM port application software, the EX-6112-2PoE provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. The EX-6112-2PoE supports Power over Ethernet and can be powered directly from a PoE-compliant power supply unit (PSE) via the Ethernet cable. In addition, serial devices can communicate with each other in peer-to-peer mode without the need for an intermediate PC or conversion software.
Interface: RS-232 V.24
15KV ESD Surge Protection for all serial signal
Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space
Fully IEEE 802.3af compliant PoE (PSE) type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W
RS-232 Signal:
TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
Ethernet Protocol:
TCP Server, TCP Client, UPD, VCOM, Serial Telnet/RFC2217
Direct connection with Socket Port
Point to point connection, don’t need any software
Virtual COM Software for download
Voltage +5V configurable on pin 9
Rugged Metal Case
Desktop or wall mounting, optional DIN-Rail Kit
Delivery contents:EX-6112-2PoE, power supply 12V/3A, manual
EX-6122-2POE
Ethernet PoE to 2x RS-232/422/485 port, incl. 12V/3A power supply
The EX-6122-2PoE is a multi-protocol RS-232/422/485 serial device server designed to connect RS-232/422/485 serial devices, including point-of-sale systems, barcode readers, sensors, meters, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial devices are connected via Ethernet and are available for sharing on the subnet and Internet. Remote configuration is done via extensive network protocols such as TCP server, TCP client, UDP, VCOM or Telnet RFC2217. To ensure backward compatibility with legacy serial devices running existing COM port application software, the EX-6122-2PoE provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. The EX-6122-2PoE supports Power over Ethernet and can be powered directly from a PoE-compliant power supply unit (PSE) via the Ethernet cable. In addition, serial devices can communicate with each other in peer-to-peer mode without the need for an intermediate PC or conversion software.
Interface: RS-232 V.24, RS-422/485 selected by DIP switches
15KV ESD Surge Protection for all serial signals
Data Bits: 7, 8 / Stop Bits: 1, 2 / Parity: None, Even, Odd, Mark, Space
Signal:
RS-232: TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
RS-422: TXD+, TCD-, RXD+ RXD-, GND
RS-485: 2 wire - Data+, Data-, GND
RS-485: 4 wire - TXD+, TCD-, RXD+, RXD-, GND
Ethernet Protocol:
TCP Server, TCP Client, UPD, VCOM or Telnet RFC2217
Direct connection with Socket Port$
Point to point connection, no software required
Virtual COM Software for download
Voltage +5V configurable on pin 9
Desktop or wall mounting, optional DIN-Rail Kit
Packaging contents: EX-6122-2PoE, Power Supply 12V/3A, Manual
EX-6114-2POE
Ethernet PoE to 4x RS-232 port, incl. 12V/3A power supply
The EX-6114-2PoE is a multi-protocol RS-232 serial device server designed to connect RS-232 serial devices, including point-of-sale systems, barcode readers, sensors, meters, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial devices are connected via Ethernet and are available for sharing on the subnet and Internet. Remote configuration is done via extensive network protocols such as TCP server, TCP client, UDP, VCOM, serial Telnet/RFC2217. To ensure backward compatibility with legacy serial devices running existing COM port application software, the EX-6114-2PoE provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. The EX-6114-2PoE supports Power over Ethernet and can be powered directly from a PoE-compliant power supply unit (PSE) via the Ethernet cable. In addition, serial devices can communicate with each other in peer-to-peer mode without the need for an intermediate PC or conversion software.
Interface: RS-232 V.24
15KV ESD Surge Protection for all serial signal
Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space
Fully IEEE 802.3af compliant PoE (PSE) type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W
RS-232 Signal:
TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
Ethernet Protocol:
TCP Server, TCP Client, UPD, VCOM, Serial Telnet/RFC2217
Direct connection with Socket Port
Point to point connection, don’t need any software
Virtual COM Software for download
Voltage +5V configurable on pin 9
Rugged Metal Case
Desktop or wall mounting, optional DIN-Rail Kit
Delivery contents:EX-6114-2PoE, power supply 12V/3A, manual
EX-6124-2POE
Ethernet PoE to 4x RS-232/422/485 port, incl. 12V/3A power supply
The EX-6124-2PoE is a multi-protocol RS-232/422/485 serial device server designed to connect RS-232/422/485 serial devices, including point-of-sale systems, barcode readers, sensors, meters, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial devices are connected via Ethernet and are available for sharing on the subnet and Internet. Remote configuration is done via extensive network protocols such as TCP server, TCP client, UDP, VCOM or Telnet RFC2217. To ensure backward compatibility with legacy serial devices running existing COM port application software, the EX-6124-2PoE provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. The EX-6124-2PoE supports Power over Ethernet and can be powered directly from a PoE-compliant power supply unit (PSE) via the Ethernet cable. In addition, serial devices can communicate with each other in peer-to-peer mode without the need for an intermediate PC or conversion software.
Interface: RS-232 V.24, RS-422/485 selected by DIP switches
15KV ESD Surge Protection for all serial signals
Data Bits: 7, 8 / Stop Bits: 1, 2 / Parity: None, Even, Odd, Mark, Space
Signal:
RS-232: TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
RS-422: TXD+, TCD-, RXD+ RXD-, GND
RS-485: 2 wire - Data+, Data-, GND
RS-485: 4 wire - TXD+, TCD-, RXD+, RXD-, GND
Ethernet Protocol:
TCP Server, TCP Client, UPD, VCOM or Telnet RFC2217
Direct connection with Socket Port$
Point to point connection, no software required
Virtual COM Software for download
Voltage +5V configurable on pin 9
Desktop or wall mounting, optional DIN-Rail Kit
Packaging contents: EX-6124-2PoE, Power Supply 12V/3A, Manual
EX-6111-2
Ethernet to 1 x RS-232 port, incl. 5V/4A power supply
The EX-6111-2 is a multi-protocol RS-232 serial Device Server designed to connect a RS-232 serial device, including point-of-sale systems, barcode readers, sensors, meters, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial device is connected via Ethernet and available for sharing on the subnet and Internet. Remote configuration is done via extensive network protocols such as TCP server, TCP client, UDP, VCOM or serial Telnet/RFC2217. To ensure backward compatibility with legacy serial devices running existing COM port application software, the EX-6111-2 provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. In addition, serial devices can communicate with each other in peer-to-peer mode without the need for an intermediate PC or conversion software.
Interface: RS-232 V.24
15KV ESD Surge Protection for all serial signal
Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space
RS-232 Signal:
TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
Ethernet Protocol:
TCP Server, TCP Client, UPD, VCOM, Serial Telnet/RFC2217
Direct connection with Socket Port
Point to point connection, don’t need any software
Virtual COM Software for download
Voltage +5V configurable on pin 9
Rugged Metal Case with wallmount- and DIN-Rail Kit
Packaging contents:EX-6111-2, Power Supply 5V/4A, DIN-Rail Kit, Wallmount kit, Manual
EX-6030-5V
Ethernet to 1x RS-232, Metal case, +5V to Pin 9
The EX-6030-5V in a metal housing allows you to connect serial devices via the network (Ethernet) in the simplest possible way. This means that you are no longer limited to a fixed distance, but can control any RS-232 peripheral device via the network. You can simply integrate the EX-6030-5V into the network with an IP address (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP ping). Control is also possible via the enclosed and other Virtual Com Port software. The COM ports are entered in the Device Manager. The EX-6030-5V can be screwed directly to the wall or installed in a 19" rack using the DIN rail kit. The EX-6030-5V supports the external voltage of +5V on pin 9 of the serial connector.
Interface: RS-232 V.24
15KV ESD Surge Protection for all serial signals
Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space
RS-232 Signal: TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
Ethernet Protocol: TCP Server, TCP Client, UPD, VCOM, Serial Telnet RFC2217
Direct connection with Socket Port
Point to point connection, no software required
Virtual COM Software for download
Voltage +5V configurable on Pin 9
Rugged Metal Case, including Wallmount- and DIN-Rail Kit
Package contents: EX-6030-5V, Power Supply 5V/2A, Wall Mount Kit, Din-Rail Kit, Driver CD, Manual
EX-6051POE
Ethernet to 1x RS-422/485 ports with PoE
The EX-6051POE metal box series data gateway is designed to connect your serial devices to the Internet instantly. It delivers simple, reliable and cost-effective network connectivity for multiple serial devices. The EX-6051POE can extract power from a conventional twisted pair Cat 5 Ethernet cable, conforming to IEE-E802af Power-over-Ethernet standard. Si it does not need a external AC power adapter. It is an ideal solution for critical application. The EX-6051POE can be simply attached to the network via IP address and port number (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP-Ping). Also included is a „Virtual Com Port Software“ to access the port via Windows . The Com Port will be entered in the Device Manag-er. The EX-6051POE possesses holes for wall mounting and a DIN-Rail Kit (EX-6099 optional) to install it into a 19” Rack Mount case.
Interface: RS-422/485
Support Power over Ethernet
Daten Bits: 6, 7, 8 / Stopbits: 1, 2 / Parity: none, even, odd
Signal RS-422: TXD+, TXD-, RXD+, RXD-, GNDRS-485: DATA+, DATA-, GND
4-Wire RS-422(TXD+/-, RXD+/-) Full Duplex 2–Wire RS-485 (TXD+/-, RXD+/-) Half Duplex
Ethernet Protokoll: IP, TCP, UDP, DHCP
EX-6051POEIS
Ethernet to 1x RS-422/485 ports with PoE
The EX-6051PoEIS serial data Gateway in a rugged metal case is the easiest way to connect your serial devices over the network (Ethernet). No longer limited to a fixed distance, you can control any RS-232 peripheral device over the network. It is equipped with surge protection and isolation. You can easily integrate the EX-6051PoEIS into your network with an IP address (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP ping). It can also be controlled using the supplied Virtual Com Port software or other software. The COM ports are then entered in the Device Manager. The EX-6051PoEIS supports PoE (Power over Ethernet) and can be powered directly over the network cable using a suitable switch. In this case, no power supply is required. The EX-6051PoEIS can be screwed directly to the wall or mounted in a 19" rack using the optional DIN-Rail kit (EX-6099).
Interface: RS-422/485
500W Surge Protection and 2.5KV Isolation
Supports PoE as Powered Device (PD)
Data Bits: 6, 7, 8
Stop Bits: 1, 2
Parity: none, even, odd
Signals RS-422: TXD+, TXD-, RXD+, RXD-, GND / Signals RS-485: DATA+, DATA-, GND- 4-Wire RS-422(TXD+/-, RXD+/-) Full Duplex- 2-Wire RS-485 (TXD+/-, RXD+/-) Half Duplex
Ethernet Protokoll: IP, TCP, UDP, DHCP
Packaging contents:EX-6051PoEIS, Power Supply +12V/1A, Driver CD, Manual
EX-6051IS
Ethernet to 1x RS-422/485, metall box
The EX-6051IS serial data Gateway in a rugged metal case is the easiest way to connect your serial devices over the network (Ethernet). No longer limited to a fixed distance, you can control any RS-232 peripheral device over the network. It is equipped with surge protection and isolation. You can easily integrate the EX-6051IS into your network with an IP address (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP ping). It can also be controlled using the supplied Virtual Com Port software or other software. The COM ports are then entered in the Device Manager. The EX-6051IS can be screwed directly to the wall or mounted in a 19" rack using the optional DIN-Rail kit (EX-6099).
Interface: RS-422/485
500W Surge Protection and 2.5KV Isolation
Data Bits: 6, 7, 8
Stop Bits: 1, 2
Parity: none, even, odd
Signals RS-422: TXD+, TXD-, RXD+, RXD-, GND / Signals RS-485: DATA+, DATA-, GND- 4-Wire RS-422(TXD+/-, RXD+/-) Full Duplex- 2-Wire RS-485 (TXD+/-, RXD+/-) Half Duplex
Ethernet Protokoll: IP, TCP, UDP, DHCP
Packaging contents:EX-6051IS, Power Supply +12V/1A, Driver CD, Manual
EX-6030
Ethernet to 1x Serial RS-232, Metal box
The EX-6030 in metal housing allows you to connect your serial devices over the network (Ethernet) in the simplest way. You are no longer limited to a fixed distance, but can control any RS-232 peripheral device over the network. You can easily connect EX-6030 to the network with IP address (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP ping). The control is also possible via the enclosed and other Virtual Com Port Software. The COM ports are then entered in the device manager. The EX-6030 can be screwed directly to the wall or installed in a 19" rack with the DIN-Rail Kit.
Interface: RS-232 V.24
Data Bits: 7, 8
Parity: none, even, odd
RS-232 Signal: TxD, RxD, GND (Loop RTS, CTS, DTR, DSR, DCD)
Ethernet Protocol: IP, TCP, DHCP
Chipset: Samsung S3C4510B
Packaging contents:EX-6030, Power Supply 5V/2A, Wall Mount Kit, DIN-Rail Kit, Driver CD, Manual
EX-6112-2
Ethernet to 2x RS-232 port, incl. 12V/3A power supply
The EX-6112-2 is a multi-protocol RS-232 serial device server designed to connect RS-232 serial devices, including point-of-sale systems, barcode readers, sensors, meters, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial devices are connected via Ethernet and are available for sharing on the subnet and Internet. Remote configuration is done via extensive network protocols such as TCP server, TCP client, UDP, VCOM, serial Telnet, RFC2217, remote pair master slave or Modbus RTU. To ensure backward compatibility with legacy serial devices running existing COM port application software, the EX-6112-2 provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. In addition, serial devices can communicate with each other in peer-to-peer mode without the need for an intermediate PC or conversion software.
Interface: RS-232 V.24
15KV ESD Surge Protection for all serial signal
Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space
RS-232 Signal:
TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
Ethernet Protocol:
TCP Server, TCP Client, UPD, VCOM, Serial Telnet/RFC2217
Direct connection with Socket Port
Point to point connection, don’t need any software
Virtual COM Software for download
Voltage +5V configurable on pin 9
Rugged Metal Case
Desktop or wall mounting, optional DIN-Rail Kit
Delivery contents:EX-6112-2, power supply 12V/3A, manual
EX-6162
Ethernet to 2x RS-232 port, incl. 12V/3A Power Supply, only for Windows
The EX-6162 is a multiprotocol serial-to-Ethernet converter designed to connect RS-232 serial devices such as point-of-sale systems, barcode readers, sensors, gauges, weighing systems, CNC controllers, and PLCs to an IP-based Ethernet network.The converter acts as a “remote USB to serial converter” over Ethernet. With its Windows-based configuration GUI and virtual USB COM drivers, the system can instantly add fully functional serial ports over Ethernet from anywhere.With Ethernet being the most popular and flexible connection in this modern industry, the serial device converter, with its complete software and support for a wide range of selectable models, offers an ideal solution for adding serial devices and increasing the value of your applications.
Interface: RS-232 V.24
15KV ESD Surge Protection for all serial signal
Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space
RS-232 Signal:
TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
Ethernet Interface: IEEE 802.3, IEEE 802.3u
Virtual COM Software for download
Voltage +5V configurable on Pin-9
Rugged Metal Case
Desktop or wall mounting, optionally available DIN-Rail Kit
Packaging contents: EX-6162, Power Supply 12V/3A, Manual
EX-6122-2
Ethernet to 2x RS-232/422/485 port, incl. 12V/3A power supply
The EX-6122-2 is a multi-protocol RS-232/422/485 serial device server designed to connect RS-232/422/485 serial devices, including point-of-sale systems, barcode readers, sensors, meters, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial devices are connected via Ethernet and are available for sharing on the subnet and Internet. Remote configuration is done via extensive network protocols such as TCP server, TCP client, UDP, VCOM or Telnet RFC2217. To ensure backward compatibility with legacy serial devices running existing COM port application software, the EX-6122-2 provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. In addition, serial devices can communicate with each other in peer-to-peer mode without the need for an intermediate PC or conversion software.
Interface: RS-232 V.24, RS-422/485 selected by DIP switches
15KV ESD Surge Protection for all serial signals
Data Bits: 7, 8 / Stop Bits: 1, 2 / Parity: None, Even, Odd, Mark, Space
Signal:
RS-232: TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
RS-422: TXD+, TCD-, RXD+ RXD-, GND
RS-485: 2 wire - Data+, Data-, GND
RS-485: 4 wire - TXD+, TCD-, RXD+, RXD-, GND
Ethernet Protocol:
TCP Server, TCP Client, UPD, VCOM or Telnet RFC2217
Direct connection with Socket Port$
Point to point connection, no software required
Virtual COM Software for download
Voltage +5V configurable on pin 9
Desktop or wall mounting, optional DIN-Rail Kit
Packaging contents: EX-6122-2, Power Supply 12V/3A, Manual
EX-6114-2
Ethernet to 4x RS-232 port, incl. 12V/3A power supply
The EX-6114-2 is a multi-protocol RS-232 serial device server designed to connect RS-232 serial devices, including point-of-sale systems, barcode readers, sensors, meters, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial devices are connected via Ethernet and are available for sharing on the subnet and Internet. Remote configuration is done via extensive network protocols such as TCP server, TCP client, UDP, VCOM, serial Telnet/RFC2217. To ensure backward compatibility with legacy serial devices running existing COM port application software, the EX-6114-2 provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. In addition, serial devices can communicate with each other in peer-to-peer mode without the need for an intermediate PC or conversion software.
Interface: RS-232 V.24
15KV ESD Surge Protection for all serial signal
Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space
RS-232 Signal:
TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
Ethernet Protocol:
TCP Server, TCP Client, UPD, VCOM, Serial Telnet/RFC2217
Direct connection with Socket Port
Point to point connection, don’t need any software
Virtual COM Software for download
Voltage +5V configurable on pin 9
Rugged Metal Case
Desktop or wall mounting, optional DIN-Rail Kit
Delivery contents:EX-6114-2, power supply 12V/3A, manual
Tip
EX-6164
Ethernet to 4x RS-232 port, incl. 12V/3A Power Supply, only for Windows
The EX-6164 is a multiprotocol serial-to-Ethernet converter designed to connect RS-232 serial devices such as point-of-sale systems, barcode readers, sensors, gauges, weighing systems, CNC controllers, and PLCs to an IP-based Ethernet network.The converter acts as a “remote USB to serial converter” over Ethernet. With its Windows-based configuration GUI and virtual USB COM drivers, the system can instantly add fully functional serial ports over Ethernet from anywhere.With Ethernet being the most popular and flexible connection in this modern industry, the serial device converter, with its complete software and support for a wide range of selectable models, offers an ideal solution for adding serial devices and increasing the value of your applications.
Interface: RS-232 V.24
15KV ESD Surge Protection for all serial signal
Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space
RS-232 Signal:
TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
Ethernet Interface: IEEE 802.3, IEEE 802.3u
Virtual COM Software for download
Voltage +5V configurable on Pin-9
Rugged Metal Case
Desktop or Wall Mounting, optionally available DIN-Rail Kit
Packaging contents: EX-6164, Power Supply 12V/3A, Manual
EX-6124-2
Ethernet to 4x RS-232/422/485 port, incl. 12V/3A power supply
The EX-6124-2 is a multi-protocol RS-232/422/485 serial device server designed to connect RS-232/422/485 serial devices, including point-of-sale systems, barcode readers, sensors, meters, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial devices are connected via Ethernet and are available for sharing on the subnet and Internet. Remote configuration is done via extensive network protocols such as TCP server, TCP client, UDP, VCOM or Telnet RFC2217. To ensure backward compatibility with legacy serial devices running existing COM port application software, the EX-6124-2 provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. In addition, serial devices can communicate with each other in peer-to-peer mode without the need for an intermediate PC or conversion software.
Interface: RS-232 V.24, RS-422/485 selected by DIP switches
15KV ESD Surge Protection for all serial signals
Data Bits: 7, 8 / Stop Bits: 1, 2 / Parity: None, Even, Odd, Mark, Space
Signal:
RS-232: TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
RS-422: TXD+, TCD-, RXD+ RXD-, GND
RS-485: 2 wire - Data+, Data-, GND
RS-485: 4 wire - TXD+, TCD-, RXD+, RXD-, GND
Ethernet Protocol:
TCP Server, TCP Client, UPD, VCOM or Telnet RFC2217
Direct connection with Socket Port$
Point to point connection, no software required
Virtual COM Software for download
Voltage +5V configurable on pin 9
Desktop or wall mounting, optional DIN-Rail Kit
Packaging contents: EX-6124-2, Power Supply 12V/3A, Manual
EX-61001
Serial Device Server 1x RS232/422/485, incl. Power Supply
EX-61001 is a multi-protocol serial device server for integrating RS-232/422/485 serial devices (e.g. payment terminals, barcode readers, sensors, measuring devices, weighing systems, CNC controllers, etc.) into an IP-based Ethernet network and provides direct access to serial devices from any point of the network. Configuration is done in a convenient way via web browser and a wide range of operation modes such as TCP Server, TCP Client, UPD, VCOM, Remote Pair Master Slave, Modbus Server, Modbus Client are supported.
Schnittstelle RS-232V.24/422/485
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 2
Parity: None, Even, Odd
Signals:
RS-232: TXD, RXD, RTS, CTS, DTR, DSR, DCD and GND
RS-422: TXD+, TCD-, RXD+ RXD-, GND
RS-485: 2-Wire - Data+, Data-, GND
Operating Modes:
TCP Server, TCP Client, UPD, VCOM
Remote pair master-slave
Modbus Server, Modbus Client
Point to point connection, no software needed
Virtual-COM software (Download)
Robust Metal Housing with DIN-Rail Kit
Delivery contents:EX-61001, Power Supply, DIN-Rail Kit, Quick Start Guide
EX-61011
Serial Device Server 1x RS232/422/485, incl. power supply
The EX-61011 is a multiprotocol RS-232/422/485 serial device server for integrating RS-232/422/485 serial devices, such as barcode scanners, weighing systems and payment terminals, into an IP-based Ethernet network. The serial devices are connected to the network and are available for sharing on the subnet and the Internet. Extensive network protocols such as TCP Server, TCP Client, UDP, VCOM, Remote Pair Master Slave, Modbus Server, Modbus Client and SNMP are supported. In addition, serial devices with remote pair master-slave mode can communicate with each other via peer-to-peer mode without the need for an intermediate PC or conversion software. With the Virtual COM (VCOM) software available for download, a perfectly migrated virtual serial port can be created on Windows computers for each serial device.
Interface: RS-232V.24/422/485
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 2
Parity: None, Even, Odd
Signals:
RS-232: TXD, RXD, RTS, CTS and GND
RS-422: TXD+, TCD-, RXD+ RXD-, GND
RS-485: 2 wire - Data+, Data-, GND
Operating modes:
VCOM, TCP Server, TCP Client, UPD, Modbus Server, Modbus Client
Point to point connection, no software needed
Virtual-COM software (download)
Robust metal housing
Delivery contents:EX-61011, power supply, DB9 serial cable, quick start guide
EX-61002
Serial Device Server 2x RS232/422/485, incl. Power Supply
EX-61002 is a multi-protocol serial device server for integrating RS-232/422/485 serial devices (e.g. payment terminals, barcode readers, sensors, measuring devices, weighing systems, CNC controllers, etc.) into an IP-based Ethernet network and provides direct access to serial devices from any point of the network. Configuration is done in a convenient way via web browser and a wide range of operation modes such as TCP Server, TCP Client, UPD, VCOM, Remote Pair Master Slave, Modbus Server, Modbus Client are supported.
Interface RS-232V.24/422/485 with 2 Ports
Interface and operation mode can be defined individually for each port
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 2
Parity: None, Even, Odd
Signals:
RS-232: TXD, RXD, RTS, CTS, DTR, DSR, DCD and GND
RS-422: TXD+, TCD-, RXD+ RXD-, GND
RS-485: 2-Wire - Data+, Data-, GND
Operating Modes:
TCP Server, TCP Client, UPD, VCOM
Remote pair master-slave
Modbus Server, Modbus Client
Point to point connection, no software needed
Virtual-COM software (Download)
Robust Metal Housing with DIN-Rail Kit
Delivery contents:EX-61002, 2x Cable Adapter RJ45-DB9, Power Supply, DIN-Rail Kit, Quick Start Guide
EX-61004
Serial Device Server 4x RS232/422/485, incl. Power Supply
EX-61004 is a multi-protocol serial device server for integrating RS-232/422/485 serial devices (e.g. payment terminals, barcode readers, sensors, measuring devices, weighing systems, CNC controllers, etc.) into an IP-based Ethernet network and provides direct access to serial devices from any point of the network. Configuration is done in a convenient way via web browser and a wide range of operation modes such as TCP Server, TCP Client, UPD, VCOM, Remote Pair Master Slave, Modbus Server, Modbus Client are supported.
Interface RS-232V.24/422/485 with 4 Ports
Interface and operation mode can be defined individually for each port
Data bits: 5, 6, 7, 8 / Stop bits: 1, 2
Parity: None, Even, Odd
Signals:
RS-232: TXD, RXD, RTS, CTS, DTR, DSR, DCD and GND
RS-422: TXD+, TCD-, RXD+ RXD-, GND
RS-485: 2-Wire - Data+, Data-, GND
Operating modes:
TCP Server, TCP Client, UPD, VCOM
Remote pair master-slave
Modbus Server, Modbus Client
Point to point connection, no software needed
Virtual-COM software (Download)
Robust Metal Housing with DIN-Rail Kit
Delivery contents:EX-61004, 4x Cable Adapter RJ45-DB9, Power Supply, Wall Mounting Bracket, Quick Start Guide
EX-61008
Serial Device Server 8x RS232/422/485, incl. Power Supply
EX-61008 is a multi-protocol serial device server for integrating RS-232/422/485 serial devices (e.g. payment terminals, barcode readers, sensors, measuring devices, weighing systems, CNC controllers, etc.) into an IP-based Ethernet network and provides direct access to serial devices from any point of the network. Configuration is done in a convenient way via web browser and a wide range of operation modes such as TCP Server, TCP Client, UPD, VCOM, Remote Pair Master Slave, Modbus Server, Modbus Client are supported.
Interface RS-232V.24/422/485 with 8 Ports
Interface and operation mode can be defined individually for each port
Data bits: 5, 6, 7, 8 / Stop bits: 1, 2
Parity: None, Even, Odd
Signals:
RS-232: TXD, RXD, RTS, CTS, DTR, DSR, DCD and GND
RS-422: TXD+, TCD-, RXD+ RXD-, GND
RS-485: 2-Wire - Data+, Data-, GND
Operating Modes:
TCP Server, TCP Client, UPD, VCOM
Remote pair master-slave
Modbus Server, Modbus Client
Point to point connection, no software needed
Virtual-COM software (Download)
Robust Metal Housing with DIN-Rail Kit
Delivery contents:EX-61008, 8x Cable Adapter RJ45-DB9, Power Supply, Wall Mounting Bracket, Quick Start Guide