Ethernet to 1 x RS-232 and 1 x RS-422/485, incl. DIN-Rail Kit and Wall Mount Kit
EX-6131-2 is a multi-protocol serial device server designed to connect one RS-232 and one RS-422/485 serial device, including POS, barcode readers, sensors, gauges, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial devices are connected via Ethernet and available for sharing on the subnet and Internet, with remote configuration via various network protocols such as TCP server, TCP client, UDP, VCOM, serial Telnet, RFC2217, remote pair master slave, Modbus RTU. To be backward compatible with the legacy serial device running the existing COM port application software, EX-6131-2 provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. In addition, serial devices with remote pair master-slave mode can communicate with each other via peer-to-peer mode without the need for an intermediate PC or conversion software.
- Interface Port 1: RS-232 V.24 / Port 2: RS-422/485
- 15KV ESD Surge Protection for all serial signals
- Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space
- Signal:
- RS-232: TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
- RS-422: TXD+, TCD-, RXD+ RXD-, GND
- RS-485: 2 wire - Data+, Data-, GND
- RS-485: 4 wire - TXD+, TCD-, RXD+, RXD-, GND
- Ethernet Protocol:
- TCP Server, TCP Client, UPD, VCOM, Serial Telnet
- RFC2217, Remote-Pair-Master-Slave
- Modbus Server, Modbus Client
- Direct connection with Socket Port
- Point to point connection, no software required
- Virtual COM software is available for download
- Rugged Metal Case with DIN-Rail Kit and Wall Mount Kit
Packaging contents:
EX-6131-2, DIN-Rail Kit, Wall Mount Kit, Manual
| Connections: | 10-pin TB |
|---|---|
| Data transmission: | 100Base-T |
| Interface: | RS-232/422/485 |
| Mounting Type: | DIN-Rail |
| Number of ports: | 2 |
| Power connection: | TB 5V |
| Surge protection: | 15KV ESD |
| Temperature range: | 0°C to +55°C |
accessories
