The EX-6011 8 Digital I/O to Ethernet adapter is designed to control the Digital I/O signals on the Ethernet (Internet). It provides a simple, reliable and cost-effective network connection for your Digital I/O applications such as home or industrial automation environment, Digital I/O control from any PC on the network, alarm and power monitoring over the network or Internet, computer controlled machines and remote lighting and power control. The unique I/O Extender Mode, provides a lightweight and simple solution to transmit digital I/O signals over the network. It offers the possibility to remotely monitor and control the state of the end device (on/off). With two EX-6011 as master and slave respectively (see application example 1) this installation is operating system independent and does not require any drivers. The EX-6011 easily transmits the state of 4 digital input and output signals. If the hardware blocks, the EX-6011 has a built-in "Watch Dog" function to reset the EX-6011 via the network. You can easily connect EX-6011 to the network with IP address (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP ping). The EX-6011 can be screwed directly to the wall or installed in a 19" rack with the DIN-Rail Kit. 4 digital input and 4 output lines 2 non-inverted and 2 inverted output lines ESD and Surge Protection for all I/O signals The I/O line voltage is compatible with CMOS/TTL 10-pin terminal block 10/100Mbps RJ45 LAN Port Ethernet Port: Data transfer rate: 10/100 Mbps Connector: RJ45 Protocol: UDP, IP, TCP, ICMP, HTTP, DHCP, ARP Ping Digital IO Interface: The Digital I/O Interface provides 4 Digital Inputs and 4 Digital Outputsvia Ethernet (IP). The main features are: Connectors: 10 Pin Terminal Block Digital Input Lines: 4, CMOS/TTL Digital Output Lines: 4, 2 Non-Inverted and 2 Inverted, CMOS/TTL compatible Control Mode: TCP Server, TCP Client and I/O Extender Mode Protection: All digital I/O have ESD and Surge Protection Virtual COM Port Drivers for: Windows 2000/ XP / Vista / 7 / 8.x / 10 / 11 / Server 20xx Electrical characteristics of I/O lines: Parameter Value States Digital Input VoltageLowHigh < 0.8V> 2.0V Vcc = 4.5V, Iin= -85uAVcc = 4.5V, Iin = 85uA Digital Output VoltageLowHigh < 0.55V> 3.8V Vcc = 4.5V, Iol = 32mAVcc = 4.5V, Ioh = 32mA Packaging contents:EX-6011, Power Supply +5V/2A, DIN-Rail Kit, Driver CD, Manual