The EX-6069-2 is a Gigabit Ethernet card designed for the PCI bus. The EX-6069-2 supports a data transfer rate of up to 1000Mbit per second. Larger amounts of data can thus be transferred faster and more efficiently in the network. The EX-6069-2 supports Half and Full Duplex as well as NWay Auto-Negotation to automatically adapt to the speed in the network (10/100/1000 Mbit/s.). Furthermore, the card is equipped with Auto-MDI/MDI-X. In addition, it offers a very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing. Supports PCI Rev.2.3, 32-bit, 33MHz Integrated Dual 10/100/1000 Transceiver Supports Crossover Detection & Auto-Correction (for Crossover cable), Support Pair Swap/Polarity/Skew Correction Wake-on-LAN and Remote Wake-up Support Supports Full Duplex Flow Control (IEEE 802.3x) Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), Supports PCI Message Signaled Interrupt (MSI) Activity LED to check the data transfer Chipset: Realtek RTL8169SC Packaing Contents:EX-6069-2, Low Profile Bracket, Driver CD, Manual

The EX-6071B is a fast 1 Gigabit Ethernet card designed for the PCIe (x1) bus. The EX-6071B supports a data transfer rate of up to 1000Mbit per second. Larger amounts of data can thus be transferred faster and more efficiently in the network. The EX-6071B supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing.   Support 10/100/1000 Base-T Ethernet standards Support Auto-MDI/MDI-X Auto (for Crossover cable) Support Jumbo Frame up to 9Kbytes, Pair Swap/Polarity/Skew Correction Wake-on-LAN and Remote Wake-up Support Full Duplex Flow Control (IEEE 802.3x) Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), support PCI Message Signaled Interrupt (MSI) 48KB Buffer Transmit/Receiver Chip Activity LED to check the data transfer Chipset: Realtek RTL8111C Packaging Contents:EX-6071B, Low Profile Bracket, Manual

The EX-6071C is a fast 1 Gigabit Ethernet card designed for the PCIe (x1) bus. The EX-6071C supports a data transfer rate of up to 1000Mbit per second. Larger amounts of data can thus be transferred faster and more efficiently in the network. The EX-6071C supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing.   Support 10/100/1000 Base-T Ethernet standards Support Auto-MDI/MDI-X Auto (for Crossover cable) Support Jumbo Frame up to 9Kbytes, Pair Swap/Polarity/Skew Correction Wake-on-LAN and Remote Wake-up Support Full Duplex Flow Control (IEEE 802.3x) Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), support PCI Message Signaled Interrupt (MSI) 48KB Buffer Transmit/Receiver Chip Activity LED to check the data transfer Chipset: Realtek RTL8111G Packaging Contents:EX-6071C, Low Profile Bracket, Manual

The EX-60120 is a fast 10 Gigabit Ethernet card, designed for the PCIe (x2) bus. The EX-60120 supports a data transfer rate of up to 10000 Mbit per second. The PCI Express bus optimally supports the performance of the fast Realtek chipset, guaranteeing secure data transfer and excellent performance. Larger amounts of data can thus be transferred faster and more efficiently in the network. The EX-60120 supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000/2500/5000/10000Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing. Supports 10/100/1000/2500/5000/10000 Base-T Ethernet standards Fully compatible with PCI Express 3.0 form factor x2 Supports Jumbo Frame up to 16KBytes, Pair Swap/Polarity/Skew correction Auto-Negotiation with Extended Next Page capability (XNP) Support Auto-MDI/MDI-X Auto (for Crossover cable) Hardware ECC and CRC function Support IEEE 802.3az-2010 Energy Efficient Ethernet (EEE) Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum and Segmentation Task-offload (Large send and Giant send) support Supports IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.1Q VLAN tagging and IEEE 802.1ad Double VLAN Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Supports Virtual Machine Queue (VMQ) for Windows Server Hyper-V Installed Systems Wake-on-LAN and ‘RealWoW!’ Technology (remote wake-up) Activity LED data transfer mode Supports Low Profile for small Computer cases with 8cm height Chipset: Realtek RTL8127AT Packaging Contents:EX-60120, Low Profile Bracket, Manual

The EX-60121 is a fast 10 Gigabit Power over Ethernet card designed for the PCIe (x2) bus. The EX-60121 supports a data transfer rate of up to 10000 Mbit per second. The PCI Express bus optimally supports the performance of the fast Marvell chipset, guaranteeing secure data transfer and excellent performance. Larger amounts of data can thus be transferred faster and more efficiently in the network. The EX-60121 supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000/2500/5000/10000 Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. Any end devices that support Power over Ethernet can be connected to the EX-60121 without additional PoE-Switches or PoE-Injectors. A low profile bracket is supplied with the card for installation in a narrow PC housing. Supports 10/100/1000/2500/5000/10000 Base-T Ethernet standard Fully IEEE 802.3af compliant PoE (PSE) Type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W Maximum power output (PD): Type 1 = 12.95 W / Type 2 = 25.50 W Fully compliant with PCI Express 4.0 Support Jumbo Frame up to 16KBytes, Pair Swap/Polarity/Skew correction MSI, MSI-X, LSO, RSS and IPv4/IPv6 checksum offloads for high performance and low CPU usage Support IEEE 802.3az-2010 Energy Efficient Ethernet (EEE) Wake On LAN and power management features LED indicators for PoE, activity and data transfer mode Chipset: Marvell AQC113CS Packaging Contents:EX-60121, Low Profile Bracket

The EX-6081 is a fast 2.5 Gigabit Ethernet card designed for the PCIe (x1) bus. The EX-6081 supports a data transfer rate of up to 2500 Mbit per second. The PCI Express bus optimally supports the performance of the fast Realtek chipset, guaranteeing secure data transfer and excellent performance. Larger amounts of data can thus be transferred faster and more efficiently in the network. The EX-6081 supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000/2500 Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing. Support 10/100/1000/2500 Base-T Ethernet Standard Support Jumbo Frame up to 16KBytes, Pair Swap/Polarity/Skew Correction Auto-Negotiation with Extended Next Page capability (XNP) Support IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.1Q VLAN and IEEE 802.1ad Double VLAN Support Auto-MDI/MDI-X Auto (for Crossover Cable) Wake-on-LAN and `RealWoW!´ Technologie (Remote Wake-up) Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP), support for checksums and segmentation Task offload (Large Send and Giant Send) Support IEEE 802.3az-2010 Energy Efficient Ethernet (EEE) Hardware EXX and CRC function Activity LED to check the data transfer Chipset: Realtek RTL8125B Packing Contents:EX-6081, Low Profile Bracket, Manual

The EX-60111 is a fast 2.5 Gigabit Ethernet card designed for the PCIe (x1) bus. The EX-60111 supports a data transfer rate of up to 2500 Mbit per second. The PCI Express bus optimally supports the performance of the fast Realtek chipset, guaranteeing secure data transfer and excellent performance. Larger amounts of data can thus be transferred faster and more efficiently in the network. The EX-60111 supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000/2500 Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing. Support 10/100/1000/2500 Base-T Ethernet Standard Support Jumbo Frame up to 16KBytes, Pair Swap/Polarity/Skew Correction Auto-Negotiation with Extended Next Page capability (XNP) Support IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.1Q VLAN and IEEE 802.1ad Double VLAN Support Auto-MDI/MDI-X Auto (for Crossover Cable) Wake-on-LAN and `RealWoW!´ Technologie (Remote Wake-up) Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP), support for checksums and segmentation Task offload (Large Send and Giant Send) Support IEEE 802.3az-2010 Energy Efficient Ethernet (EEE) Hardware EXX and CRC function Activity LED to check the data transfer Chipset: Realtek RTL8125B Packing Contents:EX-60111, Low Profile Bracket, Manual

The EX-6081PoE is a fast 2.5 Gigabit Ethernet card designed for the PCIe (x1) bus. The EX-6081PoE supports a data transfer rate of up to 2500 Mbit per second. The PCI Express bus optimally supports the performance of the fast Realtek chipset, guaranteeing secure data transfer and excellent performance. Larger amounts of data can thus be transferred faster and more efficiently in the network. The EX-6081PoE supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000/2500 Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. Any end devices that support Power over Ethernet can be connected to the EX-6081PoE without additional PoE-Switches or PoE-Injectors. A low profile bracket is supplied with the card for installation in a narrow PC housing. Support 10/100/1000/2500 Base-T Ethernet Standard Fully IEEE 802.3af compliant PoE (PSE) Type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W Maximum Power Delivered (PD): Type 1 = 15.4W / Type 2 = 30.0W Support IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.1Q VLAN and IEEE 802.1ad Double VLAN Support Jumbo Frame up to 16KBytes, Pair Swap/Polarity/Skew Correction Support IEEE 802.3az-2010 Energy Efficient Ethernet (EEE) Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP), support for checksums and segmentation Task offload (Large Send and Giant Send) Support Auto-MDI/MDI-X Auto (for Crossover Cable) Wake-on-LAN and `RealWoW!´ Technologie (Remote Wake-up) Activity LED to check the data transfer Chipset: Realtek RTL8125B Packing Contents:EX-6081PoE, Low Profile Bracket, Manual

The EX-60102 is a fast 1 Gigabit Ethernet card with two RJ45 ports, designed for the PCIe (x1) bus. The EX-60102 supports a data transfer rate of up to 1000 Mbit per second. The PCI Express bus optimally supports the performance of the fast Realtek chipset, guaranteeing secure data transfer and excellent performance. Each port has its own Realtek chipset, allowing larger amounts of data to be transferred faster and more efficiently across the network. The EX-60102 supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing. Support 10/100/1000 Base-T Ethernet standards Support Auto-MDI/MDI-X Auto (for Crossover cable) Support Jumbo Frame up to 9Kbytes, Pair Swap/Polarity/Skew Correction Wake-on-LAN and Remote Wake-up Support Full Duplex Flow Control (IEEE 802.3x) Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), support PCI Message Signaled Interrupt (MSI) 48KB Buffer Transmit/Receiver Chip Activity LED to check the data transfer Chipset: 2x Realtek RTL8111F Packaging Contents:EX-60102, Low Profile Bracket, Manual

The EX-6072-3 is a fast 1 Gigabit Ethernet card with two RJ45 ports, designed for the PCIe (x1) bus. The EX-6072-3 supports a data transfer rate of up to 1000Mbit per second. The PCI Express bus optimally supports the performance of the fast Realtek chipset, guaranteeing secure data transfer and excellent performance. Each port has its own Realtek chipset, allowing larger amounts of data to be transferred faster and more efficiently across the network. The EX-6072-3 supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing. Support 10/100/1000 Base-T Ethernet standards Support Auto-MDI/MDI-X Auto (for Crossover cable) Support Jumbo Frame up to 9Kbytes, Pair Swap/Polarity/Skew Correction Wake-on-LAN and Remote Wake-up Support Full Duplex Flow Control (IEEE 802.3x) Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), support PCI Message Signaled Interrupt (MSI) 48KB Buffer Transmit/Receiver Chip Activity LED to check the data transfer Chipset: 2x Realtek RTL8111H Packaging Contents:EX-6072-3, Low Profile Bracket, Manual

The EX-6072-4K is a fast 1 Gigabit Ethernet card with two RJ45 ports, designed for the PCIe (x1) bus. it has galvanic isolation of up to 4KV for each RJ45 port. The EX-6072-4K supports a data transfer rate of up to 1000 Mbit per second. The PCI Express bus optimally supports the performance of the fast Realtek chipset, guaranteeing secure data transfer and excellent performance. Each port has its own Realtek chipset, allowing larger amounts of data to be transferred faster and more efficiently across the network. The EX-6072-4K supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000 Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing. Supports 10/100/1000 Base-T Ethernet standards Supports 4KVrms galvanic isolation for each RJ45 connection Supports Auto-MDI/MDI-X Auto (for Crossover cable) Supports Jumbo Frame up to 9Kbytes, Pair Swap/Polarity/Skew Correction Wake-on-LAN and Remote Wake-up Supports Full Duplex Flow Control (IEEE 802.3x) Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), support PCI Message Signaled Interrupt (MSI) 48KB Buffer Transmit/Receiver Chip Activity LED to check the data transfer Chipset: 2x Realtek RTL8111H Packaging Contents:EX-6072-4K, Low Profile Bracket, Manual

The EX-60202 is a fast 1 Gigabit Ethernet card with two RJ45 ports, designed for the PCIe (x4) bus. The EX-60202 supports a data transfer rate of up to 1000 Mbit per second. It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000 Mbps). The Intel chipset used guarantees the highest quality and reliability. Supports 10/100/1000 Base-T Ethernet standard Supports 4-lane 2.5 + 5GT/s PCI Express bus Fully compliant with PCI Express 2.0 Supports Jumbo Frames up to 9KBytes Automatic crossover detection (MDI/ MDI-X) Supports Preboot eXecution Environment (PXE) Supports Legacy and Message Signal Interrupt (MSI/MSI-X) IEEE 802.3 auto-negotiator - automatic connection configuration for speed, duplex and flow control Time stamping and IEEE 1588 Precision Time Protocol IEEE 802.3az - Energy Efficient Ethernet (EEE) Active State Power Management (ASPM) Full wake-up support (APM/ACPI) Latency Tolerance Reporting (LTR) LED indicator for activity and data transfer mode Original Intel chipset, new, not refurbished / B-goods Chipset: Intel I350-AM2 Packaging Contents:EX-60202, Low Profile Bracket, Manual

The EX-6072PoE-2 is a fast 1 Gigabit Ethernet card with two RJ45 ports, designed for the PCIe (x1) bus. The EX-6072PoE-2 supports Power over Ethernet and a data transfer rate of up to 1000 Mbit per second. The PCI Express bus optimally supports the performance of the fast Realtek chipset, guaranteeing secure data transfer and excellent performance. Each port has its own Realtek chipset, allowing larger amounts of data to be transferred faster and more efficiently across the network. The EX-6072PoE-2 supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000 Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. Any end devices that support Power over Ethernet can be connected to the EX-6072PoE-2 without additional PoE-Switches or PoE-Injectors. A low-profile bracket is supplied with the card for installation in a narrow PC housing. Support 10/100/1000 Base-T Ethernet standards Fully IEEE 802.3af compliant PoE (PSE) type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W Maximum Power Delivered (PD): Type 1 = 12.95W / Type 2 = 25.50W  Support Auto-MDI/MDI-X Auto (for Crossover cable) Support Jumbo Frame up to 9Kbytes, Pair Swap/Polarity/Skew Correction Wake-on-LAN and Remote Wake-up Support Full Duplex Flow Control (IEEE 802.3x) Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), supports PCI Message Signaled Interrupt (MSI) 48KB Buffer Transmit/Receiver Chip Activity LED to check the data transfer Chipset: 2x Realtek RTL8111H Packaging Contents:EX-6072PoE-2, Low Profile Bracket, Manual

The EX-60222 is a fast 10 Gigabit Ethernet card with two RJ45 ports, designed for the PCIe (x4) bus. The EX-60222 supports a data transfer rate of up to 10000 Mbit per second. It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000/2500/5000/10000 Mbps). The Intel chipset used guarantees the highest quality and reliability. Supports 10/100/1G/2.5G/5G/10G Base-T Ethernet standard Supports 4-lane 2.5 + 5GT/s PCI Express bus Fully compatible with PCI Express 3.0 Supports Jumbo Frames up to 9KBytes Automatic cross-over detection (MDI/ MDI-X) Supports Preboot eXecution Environment (PXE) Supports Legacy and Message Signal Interrupt (MSI/MSI-X) IEEE 802.3 auto-negotiator - Automatic link configuration for speed duplex and flow control Time-stamping and synchronization of time sensitive applications Scalable I/O for Linux environments (IPv4, IPv6,TCP/UDP) IEEE 802.3az - Energy Efficient Ethernet (EEE) Active State Power Management (ASPM) MAC Power Management controls Full wake up support (APM/ACPI) Latency Tolerance Reporting (LTR) LED indicators for activity and data transfer mode Original Intel chipset, new, not refurbished / B-goods Chipset: Intel X550-AT2 Packaging Contents:EX-60222, Low Profile Bracket, Manual

The EX-60232 is a fast 10 Gigabit network controller with two SFP+ slots, designed for the PCIe (x8) bus. It provides fast and reliable 10000 Mbit per second network access over longer distances than copper-based networks. With the SFP+ transceiver of your choice, you can connect your PCI Express-based server or workstation directly to your 10G fiber-optic network. The Intel chipset used guarantees the highest quality and reliability. Supports common 10GbE SFP+ optical and Direct Attach Copper modules Supports 8-lane 2.5 + 5GT/s PCI Express bus Fully compatible with PCI Express 2.0 Supports jumbo frames up to 9KBytes Automatic cross-over detection (MDI/ MDI-X) 802.1q VLAN support Supports Legacy and Message Signal Interrupt (MSI/MSI-X) IEEE 802.3 auto-negotiator - Automatic link configuration for speed duplex and flow control IP, TCP and UPD checksum offloading (IPv4, IPv6) capabilities IEEE 802.3az - Energy Efficient Ethernet (EEE) Active State Power Management (ASPM), MAC Power Management controls Reduced CPU utilization and improved throughput Original Intel chipset, new, not refurbished / B-goods Chipset: Intel JL82599ES Packaging Contents:EX-60232, Low Profile Bracket, Manual

The EX-60112 is a fast 2.5 Gigabit Ethernet card with two RJ45 ports, designed for the PCIe (x1) bus. The EX-60112 supports a data transfer rate of up to 2500 Mbit per second. The PCI Express bus optimally supports the performance of the fast Realtek chipset, guaranteeing secure data transfer and excellent performance. Each port has its own Realtek chipset, allowing larger amounts of data to be transferred faster and more efficiently across the network. The EX-60112 supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000/2500 Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing. Support 10/100/1000/2500 Base-T Ethernet Standard Support Jumbo Frame up to 16KBytes, Pair Swap/Polarity/Skew Correction Auto-Negotiation with Extended Next Page capability (XNP) Support IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.1Q VLAN and IEEE 802.1ad Double VLAN Support Auto-MDI/MDI-X Auto (for Crossover Cable) Wake-on-LAN and `RealWoW!´ Technologie (Remote Wake-up) Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP), support for checksums and segmentation Task offload (Large Send and Giant Send) Support IEEE 802.3az-2010 Energy Efficient Ethernet (EEE) Hardware EXX and CRC function Activity LED to check the data transfer Chipset: 2x Realtek RTL8125B Packing Contents:EX-60112, Low Profile Bracket, Manual

The EX-60212 is a fast 2.5 Gigabit Ethernet card with two RJ45 ports, designed for the PCIe (x2) bus. The EX-60212 supports a data transfer rate of up to 2500 Mbit per second. It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000/2500 Mbps). The Intel chipset used guarantees the highest quality and reliability. Supports 10/100/1000/2500 Base-T Ethernet standard Supports 2-lane 2.5 + 5GT/s PCI Express bus Fully compatible with PCI Express 2.0 Supports Jumbo Frames up to 9KBytes Automatic cross-over detection (MDI/ MDI-X) Supports Preboot eXecution Environment (PXE) Supports Legacy and Message Signal Interrupt (MSI/MSI-X) IEEE 802.3 auto-negotiator - Automatic link configuration for speed duplex and flow control Time-stamping and synchronization of time sensitive applications Scalable I/O for Linux environments (IPv4, IPv6,TCP/UDP) IEEE 802.3az - Energy Efficient Ethernet (EEE) Active State Power Management (ASPM) MAC Power Management controls Full wake up support (APM/ACPI) Latency Tolerance Reporting (LTR) LED indicators for activity and data transfer mode Original Intel chipset, new, not refurbished / B-goods Chipset: Intel I225-V Packaging Contents:EX-60212, Low Profile Bracket, Manual

The EX-6061-2 is an ultra-fast 10Gigabit Ethernet card designed for the PCI Express x4 bus. It supports a data transfer rate of up to 10'000 Mbit per second. Larger amounts of data can thus be transferred faster and more efficiently in the network. The EX-6061-2 supports Half and Full Duplex as well as NWay Auto-Negotiation to automatically adapt to the speed in the network (100/1000/10000 Mbit/s.). Furthermore, the card is equipped with Auto-MDI/MDI-X. A low profile bracket is supplied with the EX-6061-2, so the EX-6061-2 can also be used in narrow housings up to a maximum height of 8 cm. Supports 100/1000/10000 Base-T Ethernet standards Supports Auto-MDI/MDI-X Auto (for Crossover cable) Supports Jumbo Frame up to 16Kbytes EEE (Energy Efficient Ethernet) Support Full Duplex Flow Control (IEEE 802.3x) Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding PCI Express Gen-2 x4 Host Bus interface Virtual NIC support Activity LED to check the data transfer Standard CAT-6A cabling with RJ45 connector Chipset: Tehuti TN4010+AQR105 Packaging contents:EX-6061-2, Low Profile bracket, Driver CD, Manual

The EX-6069 is a high performance Gigabit LAN to PCI-Bus Card which is fully compatible with IEEE 802.3/u/ab. It is specially designed for any PC with a PCI– or PCI-X slot. With the EX-6069, you can upgrade your Ethernet LANs to the speed of 1000Mbps, that’s 10 times faster than the standard high speed Ethernet. It will supercharge your data transfer on your local network and improve your bandwidth. It provides a big transmit/receive buffer, crossover detec-tion and auto-correction. It is fully plug-and-play compatible to install it easily and quickly and does support a various range of operating systems. With the card it’s included a Low Profile bracket for small computer case. Supports PCI Rev.2.3, 32-bit, 33MHz Integrated Dual 10/100/1000 Transceiver Supports Crossover Detection & Auto-Correction (for Crossover cable), Support Pair Swap/Polarity/Skew Correction Wake-on-LAN and Remote Wake-up Support Supports Full Duplex Flow Control (IEEE 802.3x) Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), Supports PCI Message Signaled Interrupt (MSI) Activity LED to check the data transfer Chip-Set: Realtek RTL8110SC

The EX-6084 is a fast 1 Gigabit Ethernet card with four RJ45 ports, designed for the PCIe (x1) bus. The EX-6084 supports a data transfer rate of up to 1000 Mbit per second. The PCI Express bus optimally supports the performance of the fast Realtek chipset, guaranteeing secure data transfer and excellent performance. Each port has its own Realtek chipset, allowing larger amounts of data to be transferred faster and more efficiently across the network. In addition, it is possible to activate or deactivate each port individually during operation using a DIP switch. The EX-6084 supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000 Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing. Support 10/100/1000 Base-T Ethernet standards Support Auto-MDI/MDI-X Auto (for Crossover cable) Support Jumbo Frame up to 9Kbytes, Pair Swap/Polarity/Skew Correction Wake-on-LAN and Remote Wake-up Support Full Duplex Flow Control (IEEE 802.3x) Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), support PCI Message Signaled Interrupt (MSI) Virtual NIC support DIP switch for activating and deactivating each individual port  Activity LED to check the data transfer Chipset: 4x Realtek RTL8153B Packaging Contents:EX-6084, Low Profile Bracket, Manual

The EX-60204 is a fast 1 Gigabit Ethernet card with four RJ45 ports, designed for the PCIe (x4) bus. The EX-60204 supports a data transfer rate of up to 1000 Mbit per second. It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000 Mbps). The Intel chipset used guarantees the highest quality and reliability. Supports 10/100/1000 Base-T Ethernet standard Supports 4-lane 2.5 + 5GT/s PCI Express bus Fully compliant with PCI Express 2.0 Supports Jumbo Frames up to 9KBytes Automatic crossover detection (MDI/ MDI-X) Supports Preboot eXecution Environment (PXE) Supports Legacy and Message Signal Interrupt (MSI/MSI-X) IEEE 802.3 auto-negotiator - automatic connection configuration for speed, duplex and flow control Time stamping and IEEE 1588 Precision Time Protocol IEEE 802.3az - Energy Efficient Ethernet (EEE) Active State Power Management (ASPM) Full wake-up support (APM/ACPI) Latency Tolerance Reporting (LTR) LED indicator for activity and data transfer mode Original Intel chipset, new, not refurbished / B-goods Chipset: Intel I350-AM4 Packaging Contents:EX-60204, Low Profile Bracket, Manual

The EX-6074-3 is a fast 1 Gigabit Ethernet card with four RJ45 ports, designed for the PCIe (x4) bus. The EX-6074-3 supports a data transfer rate of up to 1000Mbit per second. The PCI Express bus optimally supports the performance of the fast Realtek chipset, guaranteeing secure data transfer and excellent performance. Each port has its own Realtek chipset, allowing larger amounts of data to be transferred faster and more efficiently across the network. The EX-6074-3 supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing. Support 10/100/1000 Base-T Ethernet standards Support Auto-MDI/MDI-X Auto (for Crossover cable) Support Jumbo Frame up to 9Kbytes, Pair Swap/Polarity/Skew Correction Wake-on-LAN and Remote Wake-up Support Full Duplex Flow Control (IEEE 802.3x) Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), support PCI Message Signaled Interrupt (MSI) 48KB Buffer Transmit/Receiver Chip Activity LED to check the data transfer Chipset: 4x Realtek RTL8111H Packaging Contents:EX-6074-3, Low Profile Bracket, Manual

The EX-6074PoE-2 is a fast 1 Gigabit Ethernet card with four RJ45 ports, designed for the PCIe (x1) bus. The EX-6074PoE-2 supports Power over Ethernet and a data transfer rate of up to 1000 Mbit per second. The PCI Express bus optimally supports the performance of the fast Realtek chipset, guaranteeing secure data transfer and excellent performance. Each port has its own Realtek chipset, allowing larger amounts of data to be transferred faster and more efficiently across the network. The EX-6074PoE-2 supports half and full duplex as well as NWay auto-negotation to automatically adapt to the network speed (10/100/1000 Mbps). Furthermore the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support of various operating systems. Any end devices that support Power over Ethernet can be connected to the EX-6074PoE-2 without additional PoE-Switches or PoE-Injectors. Support 10/100/1000 Base-T Ethernet standards Fully IEEE 802.3af compliant PoE (PSE) type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W Maximum Power Delivered (PD): Type 1 = 12.95W / Type 2 = 25.50W  Support Auto-MDI/MDI-X Auto (for Crossover cable) Support Jumbo Frame up to 9Kbytes, Pair Swap/Polarity/Skew Correction Wake-on-LAN and Remote Wake-up Support Full Duplex Flow Control (IEEE 802.3x) Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), supports PCI Message Signaled Interrupt (MSI) 48KB Buffer Transmit/Receiver Chip Activity LED to check the data transfer Chipset: 4x Realtek RTL8111H Packaging Contents:EX-6074PoE-2, Manual

The EX-60115 is a fast 2.5 Gigabit Ethernet card with four RJ45 ports, designed for the PCIe (x4) bus. The EX-60115 supports a data transfer rate of up to 2500 Mbit per second. It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000/2500 Mbps). The Intel chipset used guarantees the highest quality and reliability. Supports 10/100/1000/2500 Base-T Ethernet standard Supports 4-lane 2.5 + 5GT/s PCI Express bus Fully compatible with PCI Express 2.0 Supports jumbo frames up to 9KBytes Automatic cross-over detection (MDI/ MDI-X) Supports Preboot eXecution Environment (PXE) Supports Legacy and Message Signal Interrupt (MSI/MSI-X) IEEE 802.3 auto-negotiator - Automatic link configuration for speed duplex and flow control Time-stamping and synchronization of time sensitive applications. Scalable I/O for Linux environments (IPv4, IPv6,TCP/UDP) IEEE 802.3az - Energy Efficient Ethernet (EEE) Active State Power Management (ASPM) MAC Power Management controls Full wake up support (APM/ACPI) Latency Tolerance Reporting (LTR) LED indicators for activity and data transfer mode Chipset: Intel I225-V Packaging Contents:EX-60115, Low Profile Bracket, Manual