EX-6069-2
1 Port 1Gigabit Network PCI card incl. LP bracket (Realtek Chipset)
The EX-6069-2 is a Gigabit Ethernet card designed for the PCI bus. The EX-6069-2 supports a data transfer rate of up to 1000Mbit per second. Larger amounts of data can thus be transferred faster and more efficiently in the network. The EX-6069-2 supports Half and Full Duplex as well as NWay Auto-Negotation to automatically adapt to the speed in the network (10/100/1000 Mbit/s.). Furthermore, the card is equipped with Auto-MDI/MDI-X. In addition, it offers a very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing.
Supports PCI Rev.2.3, 32-bit, 33MHz
Integrated Dual 10/100/1000 Transceiver
Supports Crossover Detection & Auto-Correction (for Crossover cable),
Support Pair Swap/Polarity/Skew Correction
Wake-on-LAN and Remote Wake-up Support
Supports Full Duplex Flow Control (IEEE 802.3x)
Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding
Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), Supports PCI Message Signaled Interrupt (MSI)
Activity LED to check the data transfer
Chipset: Realtek RTL8169SC
Packaing contents:EX-6069-2, Low Profile bracket, CD, Manual
EX-12011
1 Port USB 3.2 Gen 2x2 PCIe (x4) boardwith 1x USB-C connectors, 20Gpbs
The EX-12011 USB 3.2 Gen 2x2 with PCIe Slot (x4) card provides an external SuperSpeed USB 3.2 Gen 2x2 port with USB-C connector. It supports USB 1.1 low-speed (1.5Mbps), full-speed (12Mpbs), USB 2.0 high-speed (480Mbps), USB 3.0 SuperSpeed (5Gbps), USB 3.2 Gen 2x1 SuperSpeed (10Gbps) and USB 3.2 Gen 2x2 SuperSpeed (20Gbps). It is the perfect technology for external storage enclosures, digital cameras, webcam, scanner and more. The EX-12011 supports 2.4A power on the external USB-C port. A low profile bracket is included with the EX-12011 for use with slim enclosures up to a maximum height of 8cm.
USB 3.2 Gen 2x2 PCIe x4 card with one USB-C connector
Compatible with USB 3.2 Rev. 1.0 and Intel xHCI Rev. 1.0 specifications
Compatible with PCI Express Gen3 specifications
Compatible with USB Attached SCSI protocol Rev. 1.0
Supports "Hot Swapping" and "Plug-and-Play
Supports at USB-C output: 2.4 amps / 5 volts / 12.0 watts
Supports up to 127 USB devices (USB2.0, USB3.0 and USB3.2 Gen2)
Low profile bracket included
Chipset: Asmedia ASM3242
Packaging contents:EX-12011, Low Profile bracket, Manual
EX-6081POE
1-Port 2.5Gigabit PCIe Network card PoE incl. LP bracket (Realtek Chipset)
The EX-6081PoE is a 2.5 Gigabit Ethernet card designed for the PCIe bus. It supports Power over Ethernet and a data transfer rate of up to 2.5Gbit per second. The EX-6081PoE supports Half and Full Duplex as well as NWay Auto-Negotiation to automatically adapt to the speed in the network (10/100/1000/2500 Mbps.). Furthermore, the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support for various operating systems. Any PoE capable end devices can be connected to the EX-6081PoE without additional PoE switches. A low profile bracket is supplied with the card for installation in a narrow PC housing.
Supports 10/100/1000/2500 Base-T Ethernet standards
Supports 1-Lane 2.5/5Gbps PCI Express bus
Fully IEEE 802.3af compliant PoE (PSE) type 1 = 15.40W and
IEEE802.3at PoE+ (PSE) type 2 = 34.20W
Maximum Power Delivered (PD): Type 1 = 15.4W / Type 2 = 30.0W
Fully Compliant with PCI Express version 2.1 bus
Supports 2.5G Lite (1G data rate) mode
Supports Jumbo Frame up to 16KBytes, Pair Swap/Polarity/Skew correction
Auto-Negotiation with Extended Next Page capability (XNP)
Supports Auto-MDI/MDI-X Auto (for Crossover cable)
Hardware ECC and CRC function
Supports IEEE 802.3az-2010 Energy Efficient Ethernet (EEE)
Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum and Segmentation Task-offload (Large send and Giant send) support
Supports IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.1Q VLAN
and IEEE 802.1ad Double VLAN
Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging
Supports Virtual Machine Queue (VMQ) for Windows Server Hyper-V Installed Systems
Wake-on-LAN and ‘RealWoW!’ Technology (remote wake-up)
Activity LED data transfer mode
Chipset: Realtek RTL8125B
Packaging contents:EX-6081PoE, Low Profile bracket, Driver CD, Manual
EX-60121
10 Gigabit PCIe Network card, PoE
The EX-60121 is a 10 Gigabit Ethernet card with an RJ45 port and Power over Ethernet (PoE) for the PCIe bus. It supports half and full duplex as well as auto-negotiation for automatic adjustment to the network speed (10/100/1000/10000 Mbps). Thanks to the integrated PoE functionality, connected PoE (PD) end devices (IP phones, IP cameras, etc.) can be powered via the network cable. The EX-60121 supports the PoE standards IEEE 802.3af (PoE), IEEE 802.3at (PoE+) and enables a maximum power output of up to 30W.
Supports 10/100/1000/2500/5000/1000 Base-T Ethernet standard
Fully compliant with IEEE 802.3af PoE (PSE) Type 1 = 15 W and IEEE802.3af PoE+ (PSE) Type 2 = 30 W
Maximum power output (PD): Type 1 = 12.95 W / Type 2 = 25.50 W
Fully compliant with PCI Express 4.0
Supports Jumbo Frame up to 16 Kbytes
MSI, MSI-X, LSO, RSS and IPv4/IPv6 checksum offloads for high performance and low CPU usage
Energy Efficient Ethernet (EEE), Wake On LAN and power management features
PoE power via PCIe slot or SATA connection
LED indicators for PoE, activity and data transfer mode
Chipset: Marvell AQC113CS
Packaging contents:EX-60121, low profile bracket, manual
EX-44016-2
16S PCIe Serial RS-232 Board with Octopus cable (SystemBase)
The EX-44016-2 PCI-Express I/O-adapter provides 16 high performance 16C1050-type UART compatible RS-232 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCIe Bus. The card is fully PCI-Express Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System).
Interface: RS-232 V.24 with FIFO Buffer 16C1050 with 256Byte
±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
PCIe Interface fully compliant with 1.0a up to 3.0 specification
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Supports Flow Control RTS/CTS and XON/XOFF
Supports +5V or +12V to the pin 9 from the serial male connector
Chipset: 2x SystemBase SB16C1054PCI
Packaging contents:EX-44016-2, 2x Octopus cable, 32x nuts, Driver CD, Manual
EX-44316-2
16S PCIe Serial RS-232 Board with Octopus cable (SystemBase)
The EX-44316-2 PCI-Express I/O-adapter provides 16 high performance 16C1050-type UART compatible RS-232 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCIe Bus. The card is fully PCI-Express Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System). The EX-44316-2 is supplied with two Octopus cables and a Low Profile bracket.
Interface: RS-232 V.24 with FIFO Buffer 16C1050 with 256Byte
±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
PCIe Interface fully compliant with 1.0a up to 3.0 specification
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Support Flow Control RTS/CTS and XON/XOFF
Support +5V or +12V to the pin 9 from the serial male connector
Chipset: 2x SystemBase SB16C1054PCI
Packaging contents:EX-44316-2, 2x Octopus cable, 32x nuts, Low Profile bracket, Driver CD, Manual
EX-6071B
1Gigabit PCIe Network card (Realtek Chipset)
The EX-6071B is a fast Gigabit Ethernet card designed for the PCI Express bus. It supports a data transfer rate of up to 1000Mbit per second. The EX-6071B supports Half and Full Duplex as well as NWay Auto-Negotation to automatically adapt to the network speed (10/100/1000 Mbps.). Furthermore the card is equipped with Auto-MDI/MDI-X. Furthermore, it offers a very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing.
Support 10/100/1000 Base-T Ethernet standards
Support Auto-MDI/MDI-X Auto (for Crossover cable)
Support Jumbo Frame up to 9Kbytes, Pair Swap/Polarity/Skew Correction
Wake-on-LAN and Remote Wake-up
Support Full Duplex Flow Control (IEEE 802.3x)
Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding
48KB Buffer transmit/receive Chip
Activity LED to check the data transfer
Chipset: Realtek RTL8111E
Packaging contents:EX-6071B, Low Profile bracket, Driver CD, Manual
EX-6071C
1Gigabit PCIe Network card (Realtek Chipset)
The EX-6071C is a fast Gigabit Ethernet card designed for the PCI Express bus. It EX-6071C supports a data transfer rate of up to 1000Mbit per second. The EX-6071C supports Half and Full Duplex as well as NWay Auto-Negotation to automatically adapt to the speed in the network (10/100/1000 Mbit/s.). Furthermore, the card is equipped with Auto-MDI/MDI-X. Furthermore, it offers a very extensive support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing.
Support 10/100/1000 Base-T Ethernet standards
Support Auto-MDI/MDI-X Auto (for Crossover cable)
Support Jumbo Frame up to 9Kbytes, Pair Swap/Polarity/Skew Correction
Wake-on-LAN and Remote Wake-up
Support Full Duplex Flow Control (IEEE 802.3x)
Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding
48KB Buffer Transmit/Receiver Chip
Activity LED to check the data transfer
Chipset: Realtek RTL8111G
Packaging contents:EX-6071C, Low Profile bracket, Driver CD, Manual
EX-44041-2
1S PCIe Serial RS-232 Board (MosChip)
The EX-44041-2 PCI-Express I/O-adapter provides one high performance 16C550-type UART compatible RS-232 serial port. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI-Express Bus (PCI-e). The card is fully PCI-Express Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System).
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt setting from the operating system, IRQ sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Interface: Fully compliant with 1.0a Specification
WHQL certified
Chipset: MosChip MCS9901CV
Packaging contents:EX-44041-2, Driver CD, Manual
EX-60202
2 Port 1 Gigabit PCIe Network card (Intel I350-AM2 chipset)
The EX-60202 is a 1 Gigabit Ethernet card with two RJ45 ports for the PCIe bus. It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000 Mbps). The Intel Ethernet controller used ensures the highest quality and reliability.
Supports 10/100/1000 Base-T Ethernet standard
Supports 4-lane 2.5 + 5GT/s PCI Express bus
Fully compliant with PCI Express 2.0
Supports Jumbo Frames up to 9KBytes
Automatic crossover detection (MDI/ MDI-X)
Supports Preboot eXecution Environment (PXE)
Supports Legacy and Message Signal Interrupt (MSI/MSI-X)
IEEE 802.3 auto-negotiator - automatic connection configuration for speed, duplex and flow control
Time stamping and IEEE 1588 Precision Time Protocol
IEEE 802.3az - Energy Efficient Ethernet (EEE)
Active State Power Management (ASPM)
Full wake-up support (APM/ACPI)
Latency Tolerance Reporting (LTR)
LED indicator for activity and data transfer mode
Original Intel chipset, new, not refurbished / B-goods
Chipset: Intel I350-AM2
Packaging contents:EX-60202, low profile bracket, manual
EX-60222
2 Port 10 Gigabit PCIe Network card (Intel X550-AT2 chipset)
The EX-60222 is a 10 Gigabit Ethernet card with two RJ45 ports for the PCIe bus. It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000/2500/5000/10000 Mbps). The Intel Ethernet controller used ensures the highest quality and reliability.
Supports 10/100/1G/2.5G/5G/10G Base-T Ethernet standard
Supports 4-lane 2.5 + 5GT/s PCI Express bus
Fully compatible with PCI Express 3.0
Supports Jumbo Frames up to 9KBytes
Automatic cross-over detection (MDI/ MDI-X)
Supports Preboot eXecution Environment (PXE)
Supports Legacy and Message Signal Interrupt (MSI/MSI-X)
IEEE 802.3 auto-negotiator - Automatic link configuration for speed duplex and flow control
Time-stamping and synchronization of time sensitive applications
Scalable I/O for Linux environments (IPv4, IPv6,TCP/UDP)
IEEE 802.3az - Energy Efficient Ethernet (EEE)
Active State Power Management (ASPM)
MAC Power Management controls
Full wake up support (APM/ACPI)
Latency Tolerance Reporting (LTR)
LED indicators for activity and data transfer mode
Original Intel chipset, new, not refurbished / B-goods
Chipset: Intel X550-AT2
Packaging contents:EX-60222, low profile bracket, manual
EX-60212
2 Port 2.5 Gigabit PCIe Network card (Intel I225-V chipset)
The EX-60212 is a 2.5 Gigabit Ethernet card with two RJ45 ports for the PCIe bus. It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000/2500 Mbit/s). The bandwidth of the PCI Express bus makes it possible to provide the full performance of 2.5 Gbit/s on both Ethernet ports simultaneously.
Supports 10/100/1000/2500 Base-T Ethernet standard
Supports 2-lane 2.5 + 5GT/s PCI Express bus
Fully compatible with PCI Express 2.0
Supports Jumbo Frames up to 9KBytes
Automatic cross-over detection (MDI/ MDI-X)
Supports Preboot eXecution Environment (PXE)
Supports Legacy and Message Signal Interrupt (MSI/MSI-X)
IEEE 802.3 auto-negotiator - Automatic link configuration for speed duplex and flow control
Time-stamping and synchronization of time sensitive applications
Scalable I/O for Linux environments (IPv4, IPv6,TCP/UDP)
IEEE 802.3az - Energy Efficient Ethernet (EEE)
Active State Power Management (ASPM)
MAC Power Management controls
Full wake up support (APM/ACPI)
Latency Tolerance Reporting (LTR)
LED indicators for activity and data transfer mode
Original Intel chipset, new, not refurbished / B-goods
Chipset: Intel I225-V
Packaging contents:EX-60212, low profile bracket, manual
EX-12002-2
2 Port USB 3.2 Gen 2x1 PCIe (x4) boardwith 1x USB-A and USB-C (Asmedia)
The EX-12002-2 USB 3.2 Gen 2x1 with PCIe Slot (Gen3x4) card provides two external Super-Speed+ USB 3.2 Gen 2x1 ports with 1x A- and 1x USB-C socket. It is designed to connect two additional USB 1.1, 2.0 ,3.0 and 3.2 Gen 2 devices to your workstation, desktop or server. It supports USB 1.1 Low-Speed (1.5Mbps), Full-Speed (12Mpbs), USB 2.0 High-Speed (480Mbps), USB 3.0 Super-Speed (5Gbps) and USB 3.2 Gen 2x1 Super-Speed+ (10Gbps). It is the perfect technology for External Storage Enclosures, Digital Cameras, Webcam, Scanner and more. The EX-12002-2 supports 3.0A current on the External USB 3.2 Gen 2x1 USB-C port. A low profile bracket is included with the EX-12002-2 for use with slim enclosures up to a maximum height of 8 cm.
USB 3.2 Gen 2x1 PCIe x4 card with one A-female and C-female connector
Compliant with USB 3.2 Rev.1.0 and Intel xHCI Rev. 1.0 specification
Fully PCI Express Gen3 Specification Compliant
Compatible with USB Attached SCSI Protocol Rev. 1.0
Support “Hot Swapping” and “Plug-and-Play”
Supports at A female port: 0.9 Amper / 5 Volt / 4.5 Watt
Supports at C female port: 3.0 Amper / 5 Volt / 15.0 Watt
Supports up to 127 USB devices (USB1.1, USB2.0, USB3.0 und USB 3.2 Gen 2x1)
Low Profile bracket supplied
Chipset: Asmedia ASM3142
Packaging contents:EX-12002-2, Low Profile bracket, Driver CD, Manual
EX-12000
2 Port USB 3.2 Gen 2x1 PCIe (x4) boardwith 2x USB-C connectors (Asmedia)
The EX-12000 USB 3.2 Gen 2x1 with PCIe Slot (Gen3x4) card provides two external Super-Speed+ USB 3.2 Gen 2x1 ports with 1x USB-C socket. It is designed to connect two additional USB 1.1, 2.0 ,3.0 and 3.2 Gen2 devices to your workstation, desktop or server. It supports USB 1.1 Low-Speed (1.5Mbps), Full-Speed (12Mpbs), USB 2.0 High-Speed (480Mbps), USB 3.0 Super-Speed (5Gbps) and USB 3.2 Gen 2x1 Super-Speed+ (10Gbps). It is the perfect technology for External Storage Enclosures, Digital Cameras, Webcam, Scanner and more. The EX-12000 supports 3.0A current on the External USB 3.2 Gen 2x1 ports. A low profile bracket is included with the EX-12000 for use with slim enclosures up to a maximum height of 8cm.
USB 3.2 Gen 2x1 PCIe x4 card with two USB-C female connector
Compliant with USB 3.2 Rev.1.0 and Intel xHCI Rev. 1.0 specification
Fully PCI Express Gen3 Specification Compliant
Compatible with USB Attached SCSI Protocol Rev. 1.0
Supports “Hot Swapping” and “Plug-and-Play”
Supports at USB-C female port: 3.0 Amper / 5 Volt / 15.0 Watt
Supports up to 127 USB devices (USB1.1, USB2.0, USB3.0 und USB 3.2 Gen 2x1)
Low Profile bracket supplied
Chipset: Asmedia ASM3142
Packaging contents:EX-12000, Low Profile bracket, Driver CD, Manual
EX-11192
2-Port USB 3.2 Gen 1 PCIe card with self power, 3A (Renesas)
The EX-11192 USB 3.2 Gen 1 PCIe card provides two external Super-Speed USB 3.2 Gen 1 ports. It is designed to connect multiple USB 1.1, 2.0 or 3.2 Gen 1 devices to your workstation, desktop or server. It supports USB 1.1 Low-Speed (1.5Mbps), Full-Speed (12Mpbs), USB 2.0 High-Speed (480Mbps) and USB 3.2 Gen 1 Super-Speed (5Gbps). It is the perfect technology for external storage enclosures, digital cameras, webcams, scanners and more. The card has Self Power and supports 3.0A current at each output. The EX-11192 comes with a low profile bracket for installation in narrow PC cases with a maximum height of 8 cm. The drivers can be downloaded from the website:www.exsys.de or www.exsys.ch
USB 3.2 Gen 1 PCIe card with two external connectors
Supports 3.0A on each port
Compatible to Microsoft Windows Standard Open HCD Driver
Support up to 123 devices
Fully Compliant with PCI Express Gen2 Specifications
USB 1.1 and 2.0 backward compatible
Hot Swapping
Plug-and-Play
Packaging contents: EX-11192, Low Profile bracket, Manual
EX-6081
2.5 Gigabit PCIe Network card (Realtek Chipset)
The EX-6081 is a 2.5 Gigabit Ethernet card designed for the PCIe bus. It supports a data transfer rate of up to 2.5Gbit per second.The EX-6081 supports Half and Full Duplex as well as NWay Auto-Negotation to automatically adapt to the speed in the network (10/100/1000/2500 Mbit/s.). Furthermore, the card is equipped with Auto-MDI/MDI-X. In addition, it offers a very wide support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing.
Supports 10/100/1000/2500 Base-T Ethernet standards
Supports 1-Lane 2.5/5Gbps PCI Express bus
Fully Compliant with PCI Express version 2.1 bus
Supports 2.5G Lite (1G data rate) mode
Supports Jumbo Frame up to 16KBytes, Pair Swap/Polarity/Skew correction
Auto-Negotiation with Extended Next Page capability (XNP)
Supports Auto-MDI/MDI-X Auto (for Crossover cable)
Hardware ECC and CRC function
Support IEEE 802.3az-2010 Energy Efficient Ethernet (EEE)
Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum and Segmentation Task-offload (Large send and Giant send) support
Supports IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.1Q VLAN and IEEE 802.1ad Double VLAN
Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging
Supports Virtual Machine Queue (VMQ) for Windows Server Hyper-V Installed Systems
Wake-on-LAN and ‘RealWoW!’ Technology (remote wake-up)
Activity LED data transfer mode
Supports Low Profile for small Computer case up to 8cm high
Chipset: Realtek RTL8125B
Packaging contents:EX-6081, Low Profile bracket, Driver CD, Manual
EX-60111
2.5 Gigabit PCIe Network card (Realtek Chipset)
The EX-60111 is a 2.5 Gigabit Ethernet card for the PCIe bus. It supports Half and Full Duplex as well as NWay Auto-Negotiation to automatically adapt to the speed in the network (10/100/1000/2500 Mbit/s.). Furthermore, the card is equipped with Auto-MDI/MDI-X and offers extensive support for various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC case.
Supports 10/100/1000/2500 Base-T Ethernet standards
Supports 1-Lane 2.5 + 5GT/s PCI Express bus
Fully compliant with PCI Express version 2.1
Supports 2.5G Lite (1G data rate) mode
Supports Jumbo Frame up to 16KBytes, Pair Swap/Polarity/Skew correction
Auto-Negotiation with Extended Next Page capability (XNP)
Support Auto-MDI/MDI-X Auto (for Crossover cable)
Hardware ECC and CRC function
Support IEEE 802.3az-2010 Energy Efficient Ethernet (EEE)
Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum and Segmentation Task-offload (Large send and Giant send) support
Supports IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.1Q VLAN tagging and IEEE 802.1ad Double VLAN
Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Supports Virtual Machine Queue (VMQ) for Windows Server Hyper-V Installed Systems
Wake-on-LAN and ‘RealWoW!’ Technology (remote wake-up)
Activity LED data transfer mode
Supports Low Profile for small Computer cases with 8cm height
Chipset: Realtek RTL8125B
Packaging contents:EX-60111, Low Profile bracket, manual
EX-44012
2P PCIe Parallel SPP board incl. Low Profile bracket (MosChip)
The EX-44012 PCI-Express Parallel adapter provides two SPP/EPP/ECP high performanceports. It is designed for PC, thin client or server to provide instant LPT port expansion via the PCI–Express Bus. The card is fully Universal PCI Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. With the included Low Profile Bracket the EX-44012 can also be used for small computer chassis of maximum 8 cm height.
PCI-Express x1 Parallel card with two ports
Interface: SPP (Standard Parallel Port)
I/O addresses and Interrupt setting from the operating system, IRQ sharing
Fully compliant with PCI-Express Base Specification Rev. 1.0a
Windows WHQL certification
Low Profile its included
Chip-Set: MosChip MCS9815CV
EX-42372
2S PCI Serial RS-422/485 Board incl. LowProfile bracket
The EX-42372 Universal PCI I/O adapter provides two high performance 16C950-type UART compatible RS-422/485 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI Bus. The card is fully PCI Plug-and-Play compatible and no IRQ and I/O address conflicts. Support RS-485 Auto Transceiver turn around by unique feature ATTATM hardware. With the EX-42372 also comes a LowProfile bracket, that can be used for small computer chassis with 8cm height like slim line PC.
Interface: RS-422/485 with FIFO Buffer 16C950 and 128Byte
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8, 9 / Stop Bits: 1, 1.5, 2
Parity: None, even, odd, space, mark
Signal: Three modes are selectable:
4-Wire RS-422 (TXD+/-, RxD+/-) (Fullduplex)
4-Wire RS-485 (TxD+/-, RxD+/-) (Fullduplex)
2-Wire RS-485 (Data+/-, Data+/-) (Halfduplex)
Support ATTA Auto Transmitter
Terminator TS-422/485 120 Ohm can be enable– and disable
Chip-Set: Oxford OXu16PCI952
EX-42372IS
2S PCI Serial RS-422/485 Board Surge Protection & Isolation
The EX-42372IS Universal PCI I/O adapter provides two high performance 16C950-type UART compatible RS-422/485 serial ports with Surge Protection and Isolation. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI Bus. The card is fully PCI Plug-and-Play compatible and no IRQ and I/O address conflict problems. Support RS-485 Auto Transceiver turn around by unique feature ATTATM hardware. With the EX-42372IS also comes a LowProfile bracket, that can be used for small computer chassis with 8cm height like slim line PC.
Interface: RS-422/485 with FIFO Buffer 16C950 and 128Byte
ESD Surge Protection 15KV to all lines / Isolation 2.5KV
I/O addresses: Setting from the operating system / Interrupt: Setting from theSystem BIOS with Interrupt Sharing
Data Bits: 5, 6, 7, 8, 9 / Stop Bits: 1, 1.5, 2
Parity: None, even, odd, space, mark
Signal: Three modes are selectable:
4-Wire RS-422 (TXD+/-, RxD+/-) (Fullduplex)
4-Wire RS-485 (TxD+/-, RxD+/-) (Fullduplex)
2-Wire RS-485 (Data+/-, Data+/-) (Halfduplex)
Support ATTA Auto Transmitter
Terminator RS-422/485 120 Ohm can be enable– and disable
Chip-Set: Oxford OXu16PCI952
EX-44352IS-4K
2S PCIe Serial RS-232 Board Surge Protection & 4KV Isolation
The EX-44352IS-4K PCI-Express I/O-adapter provides two high performance 16C550-type UART compatible RS-232 serial ports with 15KV ESD Surge Protection und 4KV Isola-tion. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI-Express Bus (PCI-e). The card is fully PCI-Express Plug-and-Play compatible and there are no IRQ and I/O address configuration problems.
Interface: 2x RS-232 V.24
FIFO Buffer: 16C650 with 16Byte
±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
15KV ESD Surge Protection and 4KV Isolation
I/O addresses and Interrupt: Set by System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Support PCIe slot version 1.0 to 3.0
Included for each port is a 50cm Network cable and one adapter with RJ45 to 9 Pin
Chipset: MosChip MCS9901CV
Packaging contents:EX-44352IS-4K, 2x Network cable 50 cm, 2x Adapter RJ-45 to 9 pin male connector, Driver CD, Manual
EX-45362
2S PCIe Serial RS-232/422/485 Board incl. LP bracket and Octopus cable
The EX-45362 PCIe I/O card provides two serial RS-232, 422 and 485 high performance UART 16C550 outputs. Each port can be independently configured as RS-232, 422 or 485. It is designed to add two more serial combo ports for PC, workstation or server via PCIe bus. The card is fully PCIe plug-and-play compatible and has no conflicts with IRQ and I/O addresses. It supports the ATTA Auto RS-485 transmitter features. In addition, +5V or +12V on pin 9 of the RS-232 serial connector is configurable for a POS system (Power over System). A low profile bracket for narrow PC cases is supplied with the card.
Interface: 2x RS-232 V.24, RS-422/485 - independent mode selection
±15kV IEC1000-4-2 ESD Schutz for RS232 I/O's
FIFO Buffer: 16C550 with 128Byte
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal:
RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 2 wire (Data+/-, Data+/-) (Halfduplex)
Support ATTA Auto Transmitter
Termination RS-422/485: 120 ohm, can be enabled or disabled
Support PCIe slot version 1.0 to 3.0
Packaging contents:EX-45362, Octopus cable, Low Profile bracket, Driver CD, Manual
EX-45362IS
2S PCIe Serial RS-232/422/485 Board Surge Protection & Isolation
The EX-45362IS PCIe I/O card provides two serial RS-232, 422 and 485 high performance UART 16C550 outputs with surge protection and isolation. Each port can be independently configured as RS-232, 422 or 485. It is designed to add two more serial combo ports for PC, workstation or server via PCIe bus. The card is fully PCIe plug-and-play compatible and has no conflicts with IRQ and I/O addresses. It supports the ATTA Auto RS-485 transmitter features. In addition, +5V or +12V on pin 9 of the RS-232 serial connector is configurable for a POS system (Power over System). A low profile bracket for narrow PC cases is supplied with the card.
Interface: 2x RS-232 V.24, RS-422/485: independent mode selection
15KV ESD Surge Protection and 2.5KV Isolation
±15kV IEC1000-4-2 ESD Schutz for RS232 I/O's
FIFO Buffer: 16C550 with 128Byte
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal RS-232:- TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Signal RS-422/485:- RS-422: 4 wire (TXD+/-, RXD+/-) (Fullduplex)- RS-485: 4 wire (TXD+/-, RXD+/-) (Fullduplex)- RS-485: 2 wire (Data+/-, Data+/-) (Halfduplex)
Support ATTA Auto Transmitter
Termination RS-422/485: 120 ohm, can be enabled or disabled
Support PCIe slot version 1.0 to 3.0
Packaging contents:EX-45362IS, Octopus cable, Low Profile bracket, Driver CD, Manual
EX-44343
2S Serial RS-232 / 1P Parallel Multi I/O PCIe card (MosChip)
The EX-44343 PCI Express I/O card provides two serial RS-232 high performance UART 16C550 and one parallel EPP/ECP output. It is designed to expand two additional serial outputs and one parallel Centronics output for PC, workstation or server via PCI Express bus. The EX-44343 comes with a LowProfile bracket, so the EX-44343 can be used in narrow cases up to a maximum height of 8cm. Additionally +5V or +12V on pin 9 of the connector is configurable for a POS system (Power over System).
Interface: Serial RS-232 V.24 / Parallel EPP/ECP
FIFO Buffer: 16C550 with 16Byte
I/O addresses: Setting from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Interface: Fully compliant with 1.0a specification
Chipset: ASIX/MosChip MCS9901CV
Packaging contents:EX-44343, Octopus cable, Low Profile bracket, Driver CD, Manual